Spot welded wire meshes consist of smooth wires lying one upon another, which are welded at the intersection points. Due to their inherent stability they are mostly used as barriers and fence elements. Spot welded meshes can be hot-dip galvanized in one piece even without profile edgings.

General Information

Type: blank/uncoated, galvanized^*, stainless steel, plastic-coated
• Width of the grid: up to 2.200 mm
• Length of the grid: up to 5.000 mm
• Open and closed edging meshes available

^*There are three possible types of galvanizing: • hot-dip galvanized in one piece
• using previously galvanized wires
• electrogalvanised

Stock dimensions of spot welded wire meshes in mm
Mesh pitch x Ø	Ø	blank	Stainless steel (1.4301)	kg/piece
20 x 20	2,5	1.000 x 2.000		7,6
25 x 25	3,0	1.000 x 2.000		8,8
		1.000 x 3.000		13,2
		1.250 x 2.000	1.250 x 2.500	13,7
		1.500 x 3.000		19,5
30 x 30	3,0	1.000 x 2.000	1.000 x 2.000	7,3
		1.250 x 2.500		11,6
		1.500 x 3.000		16,6
40 x 40	3,0	1.000 x 3.000		8,2
		1.250 x 2.500	1.250 x 2.500	8,7
		1.500 x 3.000		12,3
40 x 40	4,0	1.000 x 2.000	1.000 x 2.000	9,6
		1.000 x 3.000		14,5
		1.250 x 2.500		15,4
		1.500 x 3.000		22,0
		2.000 x 3.000		29,2
50 x 25	3,0	2.000 x 1.000		6,6
50 x 50	3,0	1.000 x 2.000		4,5
		1.250 x 2.500		7,0
		1.500 x 3.000		10,1
		2.000 x 3.000		12,7
50 x 50	4,0	1.000 x 2.000		7,9
		1.250 x 2.500	1.250 x 2.500	12,3
		1.500 x 3.000		17,8
		2.000 x 3.000		23,6
		2.000 x 5.000		39,4
50 x 50	5,0	1.000 x 2.000	1.000 x 2.000	12,3
		1.000 x 3.000		17,9
		1.250 x 2.500		18,7
		1.500 x 3.000		27,7
		2.000 x 3.000		36,2
50 x 50	6,0	1.500 x 3.000		40,0
75 x 75	5,0	1.250 x 2.500		12,5
100 x 100	4,0	1.500 x 3.000		8,9
100 x 100	5,0	2.000 x 3.000		18,5
100 x 100	6,0	1.000 x 2.000		8,9
100 x 50	5,0	2.000 x 3.000		27,4
200 x 50	6,0	2.000 x 3.000		32,9

Deviant mesh pitches and wire diameters as well as rectangular meshes can be delivered on inquiry.